This hinge is designed to work with a Full Wall and Pillar Modules where an angle other than 90 degrees needs to be created. The Full Hinge sits between a Full Wall Module and a Pillar Module and utilises the Velcro on the end and the front faces of the full wall and two faces of the pillar module to give a strong but flexible solution to what was once unachievable.
Dimensions: 1.88m x 35cm x 1cm. Weight: 1.6kg.
P.O.A
Physical Full Wall and Full Pillar NOT INCLUDED
BWFHWP
Full Hinge for: Full Wall to Full Pillar
Risk assessments should be conducted by the trainer to identify the level of training/instruction conducted is appropriate, and that any piece of equipment that is used for that training is suitable and all safe guards are in place.
The PVC surface is resistant to most household stains, mild acids, alkalis and drinks, as they are not absorbed by the vinyl and can be wiped off without any problem or lasting damage. Some more difficult substances such as ballpoint pen, ink and food colourings should be wiped off immediately to avoid staining.
Clean with warm soapy water applied with a damp soft, cloth followed by a clean water rinse, again applied with a damp soft cloth, DO NOT SOAK.
This will help retain the covers appearance and durability. Strong detergents, solvent cleaners, polishes or patent chemical cleaners should not be used as they are unnecessary and may cause embrittlement and cracking of the material. In cases where disinfecting is necessary, the surfaces can be cleaned with a 5% solution of bleach in water. This should be used occasionally as excessive use may damage the coated fabric.
