2 x Half Wall Module 1m x 1m 8 x Pillar Modules 2m x 25cm x 25cm 4 x Battle Blocks 1m x 50cm x 50cm 3 x Lintel/Brace 1.5m x 25cm x 20cm 2 x Barricade Lintel 1m x 25cm x 20cm 1 x Frame Reducers (Pair) 2 x Clear PVC Viewing Window 1 x Black Wall Links (Set of 10) Special components required to make a Van Cell: 1 x Van Floor  1 x Double Van Step  1 x Special Lintel/Brace  1 x Clear Van Curtains (Pair)

1x Clear Van Door

Risk assessments should be conducted by the trainer to identify the level of training/instruction conducted is appropriate, and that any piece of equipment that is used for that training is suitable and all safe guards are in place.

Black Wall is designed to “reduce” injury, it will not remove the risk completely, risk of serious injury from accidental or intended impacts will still be there, Black Wall, Floor mats and wall padding are not “fail safe” devices.

Uncontrolled or unsupervised training, along with the escalation of “normal and safe” training practice should be avoided.

The PVC surface is resistant to most household stains, mild acids, alkalis and drinks, as they are not absorbed by the vinyl and can be wiped off without any problem or lasting damage. Some more difficult substances such as ballpoint pen, ink and food colourings should be wiped off immediately to avoid staining.

Clean with warm soapy water applied with a damp soft, cloth followed by a clean water rinse, again applied with a damp soft cloth, DO NOT SOAK.

This will help retain the covers appearance and durability. Strong detergents, solvent cleaners, polishes or patent chemical cleaners should not be used as they are unnecessary and may cause embrittlement and cracking of the material. In cases where disinfecting is necessary, the surfaces can be cleaned with a 5% solution of bleach in water. This should be used occasionally as excessive use may damage the coated fabric.